Environmentally friendly insulation removal in Telford, Shropshire
Low-dust spray foam extraction for lofts, roofs and cavity walls
Environmentally friendly insulation removal in Telford, Shropshire is the clean way to strip failed spray foam from your loft, roof deck or cavity wall without dumping contaminated waste. We handle open cell and closed cell foam, polyurethane foam and isocyanate residues for homeowners, landlords and commercial units across Shropshire. If a mortgage lender has flagged spray foam, or your loft is damp and condensation-stained, we survey, extract and dispose of it responsibly.
Environmentally friendly insulation removal in Telford, Shropshire
Environmentally friendly insulation removal in Telford, Shropshire is the controlled extraction of spray foam insulation, open cell foam, closed cell foam and polyurethane foam from lofts, roof timbers and cavity walls, followed by responsible waste segregation and recycling wherever the material allows. We use dry ice blasting machines, industrial vacuums and oscillating multi-tools to lift foam off rafters and tiles without gouging the timber. Every load is bagged, labelled and sent through licensed waste routes rather than fly-tipped.
Most Telford homes we visit were spray-foamed between 2005 and 2015, and by 2026 many of those roofs are showing spray foam shrinkage, loft condensation and roof timber rot. If you are buying in Wellington or Dawley and your surveyor has flagged spray foam insulation damage, the lender usually wants it gone before completion. We also work with landlords in Telford Town Centre who need eco insulation removal Telford Shropshire style, meaning low-dust extraction that keeps tenants in place.
Why Telford homeowners choose eco removal
Spray foam removal is not just a cosmetic job. Done properly, it protects the roof structure, unlocks mortgage approval and cuts the risk of damp spreading through the ceiling below.
Protects roof timbers
Trapped moisture under closed cell foam rots rafters and battens within a few winters. Our technicians cut foam back to the timber, treat affected sections and leave the roof deck able to breathe again. On a typical Telford semi we remove 40 to 60 square metres of foam in a single day.
Unlocks mortgage approval
Mortgage refusal due to spray foam is one of the most common reasons sales stall in Shropshire. We provide a written removal summary with photographs before and after, plus waste transfer notes, so your lender and surveyor can see the roof has been returned to a standard they accept.
Cuts energy bills
Failed foam often performs worse than the loft insulation it replaced. Once we strip it out, we can reinstate Thermafleece or Rockwool loft insulation at the correct 270mm depth, which typically brings a Telford home back to a U-value of around 0.16 W/m2K and lowers winter heating costs.
Responsible waste handling
Green insulation removal Telford means the foam does not simply go to landfill. We separate polyurethane foam, isocyanate-contaminated board and sand blasting media, then route each stream to the correct licensed facility. You get the waste transfer documentation for your records.
Our five-step removal process
Every job follows the same sequence, whether it is a single loft in Madeley or a warehouse roof in Donnington. You know what is happening on each day before we start.
Survey and quote
We attend, measure the foam coverage, check rafter condition with a thermal imaging camera and note any loft condensation or cavity wall damp. You get a fixed price the same day, usually within two hours of the visit, with no charge for the survey itself.
Containment setup
On arrival we sheet floors, seal loft hatches and set up negative-pressure extraction so dust and foam particles stay inside the work zone. Technicians wear respirators and protective clothing. Setup takes 45 to 60 minutes on a standard three-bedroom house.
Foam extraction
We cut the bulk of the foam with a spray foam removal saw and oscillating multi-tool, then finish the rafters with dry ice blasting. Dry ice pellets freeze the residue so it lifts cleanly without chemicals. A typical loft takes four to seven hours of extraction work.
Timber assessment
Once the foam is off, we inspect every rafter and batten for rot, check the felt and look for water ingress. Anything suspect is photographed and flagged to you the same day, with a clear recommendation on treatment or replacement before insulation goes back.
Clean-down and handover
We vacuum the loft, remove all sheeting and bagged waste, and walk you through the finished space. You receive before-and-after photographs, waste transfer notes and a written summary suitable for your lender or building surveyor.
Four years of Shropshire spray foam work
AeroSpace Spray Foam Team has been removing spray foam insulation across Telford since 2022. In that time we have worked on hundreds of lofts, roof decks, cavity walls and commercial units, from Victorian terraces in Oakengates to modern timber-frame houses in Muxton. Our technicians hold NVQ in insulation removal and CITB certification, and we operate to CHAS accreditation and SafeContractor standards. We know the difference between open cell foam that peels away in sheets and closed cell foam that needs mechanical cutting, and we price accordingly.
- NVQ in insulation removal and CITB certification held by every lead technician on site.
- CHAS accreditation and SafeContractor registration for domestic and commercial contracts.
- Thermal imaging camera used on every survey to map damp before foam is touched.
- Experienced with BASF, Dow, Huntsman and Soudal foam systems found in Telford lofts.
- Waste routed through licensed carriers with transfer notes issued on completion.
Why our environmentally friendly insulation removal stands out
Plenty of contractors will pull foam out of a loft. Fewer will do it without coating your landing in dust, and fewer still will hand you the paperwork your lender actually wants.
Dry ice, not chemicals
Our dry ice blasting spray foam removal method uses frozen CO2 pellets rather than solvents. The pellets sublimate on contact, leaving no chemical residue on rafters and no secondary clean-up. It is the same approach we use on heritage timber where sand blasting equipment would be too aggressive.
Lender-ready paperwork
We supply a removal certificate, dated photographs and waste transfer notes for every job. Shropshire surveyors and mortgage lenders accept this pack when clearing a mortgage refusal due to spray foam, which keeps your sale or remortgage on track.
Fixed pricing, no surprises
You get a fixed price after the survey, based on square metres of foam, access difficulty and waste volume. No hourly billing, no day-rate creep. Most single-loft removals in Telford fall between 900 and 2400 pounds in 2026.
Local coverage, fast response
We cover Telford Town Centre, Wellington, Madeley, Dawley, Oakengates and the surrounding villages. If you search for eco insulation removal Telford near me, we can usually survey within 48 hours and start work inside a week.
What our insulation removal service includes
Every removal job is priced as a complete package, so you are not paying separately for containment, extraction and waste. The only extras are remedial timber work or new insulation, and we quote those separately before you commit.
On-site survey and fixed quote
We attend, measure foam coverage, check rafter condition with a thermal imaging camera and give you a fixed price the same day. There is no charge for the survey and no obligation to book.
Full dust containment
Floors are sheeted, loft hatches sealed and negative-pressure extraction set up before any cutting starts. This keeps foam dust out of your living space, which matters most in occupied homes.
Mechanical foam extraction
We cut foam with a spray foam removal saw and oscillating multi-tool, then finish rafters with dry ice blasting. Open cell and closed cell foam are handled differently, and the price reflects that.
Timber and roof inspection
Once the foam is off, we check every rafter, batten and section of felt for rot or water ingress. Anything suspect is photographed and reported to you the same day with a recommendation.
Licensed waste disposal
Foam, board and blasting media are bagged, labelled and routed to licensed facilities. You receive waste transfer notes confirming disposal, which lenders and surveyors often ask to see.
Before-and-after documentation
We photograph the loft before, during and after removal, and issue a written summary. This pack is accepted by Shropshire lenders when clearing a mortgage refusal due to spray foam.
Problems our Telford removal service solves
Spray foam that has failed does not just sit there quietly. It traps moisture, rots timber and blocks property sales. Here are the issues we deal with most often across Telford.
Mortgage refusal due to spray foam
Sales stall, buyers pull out and remortgages are declined until the foam is removed and documented. This is the single most common reason we are called out in Shropshire.
We remove the foam, photograph the roof before and after, and issue a removal certificate with waste transfer notes. Lenders and surveyors accept this pack, and most sales complete within a few weeks of the work.
Loft condensation and damp patches
Moisture trapped under closed cell foam soaks into rafters and battens, causing rot and mould on the ceiling below. Left alone, it spreads along the roof deck and into the wall plate.
We strip the foam, inspect the timbers and identify where ventilation is missing. Once the roof deck can breathe again, we advise on felt vents or tile vents to stop the problem returning.
Spray foam shrinkage and gaps
Foam that has shrunk away from rafters leaves gaps where warm air escapes. Energy bills rise, and the insulation performs worse than the mineral wool it replaced.
We remove the failed foam completely, then reinstate Thermafleece or Rockwool loft insulation at the correct 270mm depth. That brings the loft back to a U-value of around 0.16 W/m2K.
Cavity wall damp from injected foam
Foam injected into wall cavities can bridge the gap, hold water against the inner leaf and cause damp patches on internal walls. It also complicates tie replacement and structural surveys.
We assess the cavity, extract what can be removed and advise on remedial work before the wall is closed up. Where ties need replacing, we coordinate with your structural engineer.
When to book insulation removal
You are buying a Telford house and the surveyor has flagged spray foam in the loft.
We survey within 48 hours, quote a fixed price and remove the foam before completion. You get photographs and waste notes to pass to your lender.
The mortgage condition is cleared and the sale proceeds without renegotiation over the roof.
Your loft has condensation running down the felt and the foam looks wet.
We use a thermal imaging camera to map the damp, remove the foam and check every rafter for rot. We then advise on ventilation and reinstate loft insulation.
The roof deck dries out and the condensation stops, usually within one heating season.
You are a landlord in Telford Town Centre with tenants in place and foam that needs removing.
We contain the work area, work around tenants and complete most single lofts in one day. All dust stays inside the containment zone.
The foam is gone, the tenants stay put and you have documentation for your compliance file.
A commercial unit in Donnington has foam on a warehouse roof deck that is failing.
We phase the work to keep your operation running, provide RAMS and CHAS accreditation details, and dispose of the foam through licensed routes.
The roof is cleared, the deck is inspected and your facilities records are complete.
Tools and methods we use
Tools & Equipment
Dry ice blasting machine
Freezes foam residue so it lifts off rafters without chemicals or abrasives. Used as the finishing pass on every loft we clear.
Spray foam removal saw
Cuts through thick closed cell foam in straight, controlled lines. It is the fastest way to break up large foam sections before detail work.
Oscillating multi-tool
Gets into rafter ends, truss joints and tight corners where a saw will not fit. Essential for a clean finish around cables and pipework.
Industrial vacuum
Captures foam dust and debris during cutting. Paired with negative-pressure extraction to keep the rest of the house clean.
Thermal imaging camera
Maps damp and cold bridging before we start, so we know exactly where the foam is trapping moisture against the roof deck.
Respirator and protective clothing
Worn by every technician on site. Foam dust and isocyanate residue are not something to breathe in, even on a short job.
Scraper and chisel
Hand tools for lifting thin foam skins off timber and for detailing around nails and fixings where power tools would cause damage.
Methods
Dry ice blasting
Frozen CO2 pellets are fired at the foam surface, freezing it so it cracks away from the timber. The pellets sublimate on contact, leaving no chemical residue and no secondary clean-up. It is our default finish on heritage timber and on any roof where sand blasting equipment would be too aggressive.
Mechanical cutting and extraction
Bulk foam is cut into manageable sections with a spray foam removal saw, then lifted out and bagged. This is the fastest method for closed cell foam and the one we use on most Telford lofts before switching to dry ice for the detail work.
Sand blasting for hard surfaces
On brick, block and steel where foam has bonded firmly, we use controlled sand blasting media to strip the surface back. Dust is contained, and spent media is disposed of through licensed waste routes along with the foam.
Thermal-assisted removal
Heat-assisted techniques soften stubborn foam that resists mechanical cutting. Slower than dry ice blasting, but useful on thick closed cell sections and on roof decks where access is restricted.
How removal works across Telford
Telford's housing stock splits into two clear groups for spray foam work. The older terraces and semis around Oakengates, Dawley and Madeley tend to have shallow lofts, tight hatches and original felt that has already been patched. The newer timber-frame estates in Muxton, Shawbirch and Lightmoor have deeper lofts but often have foam sprayed directly onto the roof deck, which traps moisture against the OSB. Both need the same treatment, but access and containment differ. Shropshire's damp winters make loft condensation the most common complaint we hear, and foam that has been in place for a decade or more is usually the cause. We schedule most removals between October and March, when homeowners notice the damp, but we work year-round. If you need environmentally friendly insulation removal Telford Shropshire, we survey within 48 hours and quote a fixed price the same day. Most jobs are completed inside a week of booking.
Service Areas
A mix of flats and modern houses with shallow lofts. Access is often through a communal stairwell, so containment and dust control matter more here than anywhere else we work.
Older Victorian and Edwardian housing with original roof timbers. Foam here has usually been in place longer, so we check carefully for rot before quoting.
A high proportion of ex-local-authority housing with foam injected in the 2000s. Loft hatches are small and lofts are often boarded, which adds time to the setup.
Industrial units and warehouses with large roof decks. We phase work here to keep businesses trading and provide full RAMS for facilities managers.
Newer timber-frame homes where foam was sprayed onto the roof deck. Moisture gets trapped against the OSB, so ventilation is a key part of the fix.
Local Considerations
Damp Shropshire winters and persistent loft condensation
Foam that traps moisture causes rot faster here than in drier parts of the country. We prioritise timber inspection on every job and recommend ventilation improvements where the roof deck cannot breathe.
Shallow lofts in older Telford terraces
Tight access slows extraction and limits the size of equipment we can use. We bring compact multi-tools and smaller vacuum heads to work in these spaces without damaging the ceiling below.
Foam sprayed directly onto roof decks in newer estates
Closed cell foam bonded to OSB is harder to remove than foam on rafters. We use a spray foam removal saw to cut it into sections, then finish with dry ice blasting to protect the deck surface.
Mortgage lender requirements on Shropshire sales
Lenders want photographic evidence and waste documentation before they will release funds. We build the paperwork into every job so you are not chasing certificates after the work is done.
Wellington loft cleared for mortgage
A 1930s semi in Wellington had closed cell foam sprayed across the entire roof deck. The buyer's lender refused the mortgage, and the surveyor flagged early rot on four rafters. The loft hatch was only 550mm wide, which limited access.
We removed 52 square metres of foam in a single day, cutting it into sections and finishing the rafters with dry ice blasting. Four rafters were treated for rot, and the lender accepted our removal certificate and photographs. The sale completed three weeks later.
Maintenance & Follow-up
We recommended tile vents to improve airflow across the roof deck. The new owners should check the loft once each autumn for any sign of damp returning.
A three-bedroom house in Madeley had condensation running down the felt for two winters. The foam had shrunk away from the rafters, leaving gaps, and the mineral wool underneath was damp and compressed. Energy bills had risen noticeably.
We removed the failed foam and the damp mineral wool in one day, then reinstated Rockwool loft insulation at 270mm. The thermal imaging survey confirmed the roof deck was drying out within a month, and the household reported lower heating costs over the following winter.
Maintenance & Follow-up
Keep the loft hatch sealed and avoid storing items directly against the insulation. We suggest a quick visual check each spring for any new damp patches.
A warehouse unit in Donnington had open cell foam across a 400 square metre roof deck. The foam was failing in patches and shedding dust onto stored stock. The site could not shut down for the work.
We phased the removal over four days, working in sections so the business stayed open. All foam was bagged and removed through licensed routes, and the roof deck was inspected and photographed section by section. Waste transfer notes were issued for the full load.
Maintenance & Follow-up
We advised the facilities team to inspect the deck annually and to keep the roof void ventilated. Any future foam application should be avoided in favour of breathable insulation.
How much does environmentally friendly insulation removal cost in Telford?
Most single-loft removals in Telford cost between 900 and 2400 pounds in 2026, depending on foam type and access. Closed cell foam takes longer to cut than open cell, and roofs with limited loft hatch access add labour. Cavity wall and warehouse jobs are priced per square metre after survey. You get a fixed quote the same day, with no charge for the initial visit.
Can you remove insulation in an eco friendly way in Telford Shropshire?
Yes. We use dry ice blasting rather than chemical strippers, which leaves no solvent residue on your timbers. Foam is separated by type, and polyurethane foam, board and blasting media each go to the correct licensed facility. You receive waste transfer notes confirming where the material went, which matters if your lender or surveyor asks for evidence.
Is environmentally friendly insulation removal covered by insurance in Telford?
It depends on your policy and why the foam is being removed. Damage caused by failed spray foam insulation, such as roof timber rot or loft condensation, is sometimes covered under buildings insurance. We provide dated photographs, a removal report and waste notes so you can submit a clean claim. Check your policy wording before work starts.
How long does environmentally friendly insulation removal take in Telford?
A standard three-bedroom loft takes one working day, usually six to eight hours from setup to clean-down. Larger roofs, closed cell foam and cavity wall spray foam removal can run to two or three days. We confirm the expected duration in your quote so you can plan around it, and we do not leave a job half-finished overnight.
Accreditation and reviews
Certifications
Reviews
Removed closed cell foam from our loft in Wellington after the lender refused the mortgage. Survey on Tuesday, work on Thursday, certificate the same week. The sale went through. Clean, professional and they explained every step.
We had condensation in the loft for two winters. The thermal imaging survey showed exactly where the foam was trapping moisture. One day to remove it, and they reinstated the insulation properly. No damp since.
Two rental flats in Telford Town Centre needed foam removed with tenants in place. The team contained the dust, worked around everyone and finished both lofts in two days. Waste notes supplied without asking.
Warehouse roof in Donnington with failing open cell foam. They phased the work so we never shut down, provided RAMS and CHAS details, and cleared 400 square metres in four days. Documentation was spot on.
Related Services
Spray Foam Removal near me
If you are searching for spray foam removal near me in Telford, we cover every postcode in the town and surrounding villages. Our team surveys, quotes and removes foam from lofts, roofs and cavity walls, with waste transfer notes supplied on completion.
Spray Foam Removal near mesame day Spray Foam Removal
Same day spray foam removal is available across Telford for urgent cases, such as a collapsed loft ceiling or a lender deadline. Call before 10am and we can often have a crew on site the same afternoon, with full containment and extraction.
same day Spray Foam Removal24/7 Spray Foam Removal
Our 24/7 spray foam removal line covers Telford for emergency call-outs, including water-damaged foam and sudden ceiling sag. Out-of-hours work is quoted at the time of booking, and we always confirm the price before a technician travels.
24/7 Spray Foam RemovalResidential Spray Foam Removal
Residential spray foam removal across Telford covers lofts, roof decks, dormers and cavity walls in houses and bungalows. We work around your family, contain dust to the loft space and leave the property clean enough to sleep in the same night.
Residential Spray Foam RemovalCommercial Spray Foam Removal
Commercial spray foam removal in Telford covers warehouses, workshops and retail units in Donnington, Hadley and Telford Town Centre. We work outside trading hours where needed and provide RAMS, CHAS accreditation details and waste documentation for your facilities file.
Commercial Spray Foam Removalloft spray foam removal
Loft spray foam removal is our most common job in Telford. We cut foam off rafters and trusses, check for roof timber rot, then reinstate Thermafleece or Rockwool insulation at the correct depth so your loft performs as it should.
loft spray foam removalroof spray foam removal
Roof spray foam removal covers the underside of roof decks and tiles where foam has been applied directly. We use a spray foam removal saw and dry ice blasting to lift the foam without damaging felt or battens, then assess the roof for water ingress.
roof spray foam removalAttic spray foam removal
Attic spray foam removal in Telford deals with older foam that has shrunk, cracked or trapped moisture against the roof deck. We remove it, inspect the timbers and advise on ventilation before any new insulation goes down.
Attic spray foam removalspray foam insulation removal
Spray foam insulation removal is the core of what we do. Whether the foam is open cell, closed cell or a mixed system, we extract it mechanically, bag it and route it through licensed waste channels, leaving your loft ready for new insulation.
spray foam insulation removalopen cell spray foam removal
Open cell spray foam removal is usually quicker than closed cell work because the foam is softer and peels away in larger sections. We still contain the dust, vacuum the rafters and check for loft condensation before we finish.
open cell spray foam removalclosed cell spray foam removal
Closed cell spray foam removal is heavier work. The foam is dense and bonded hard to timber, so we cut it with a spray foam removal saw and finish with dry ice blasting. Expect a longer day and a higher waste volume than open cell jobs.
closed cell spray foam removalmortgage lender spray foam removal
Mortgage lender spray foam removal is for buyers and owners whose lender has refused a mortgage because of foam. We remove the foam, document the roof condition and issue a removal certificate that Shropshire surveyors and lenders accept.
mortgage lender spray foam removalinsulation removal service
Our insulation removal service covers spray foam, contaminated mineral wool and damaged board insulation. We survey first, quote a fixed price and remove everything in one visit wherever access allows, with waste transfer notes issued on completion.
insulation removal serviceinsulation assessment
An insulation assessment tells you whether your foam is actually causing a problem. We use a thermal imaging camera to map damp, check rafter condition and measure existing insulation depth, then give you a written recommendation before any removal work is booked.
insulation assessmentdry ice blasting spray foam removal
Dry ice blasting spray foam removal uses frozen CO2 pellets to freeze and lift foam residue from rafters without chemicals or abrasives. It is our preferred finish on heritage timber and on any roof where sand blasting equipment would cause damage.
dry ice blasting spray foam removalCavity wall spray foam removal
Cavity wall spray foam removal addresses foam injected into wall cavities, which often causes cavity wall damp and failed tie inspection. We assess the wall, remove what can be extracted and advise on remedial work before the cavity is closed up.
Cavity wall spray foam removalsand blasting spray foam insulation removal
Sand blasting spray foam insulation removal is used on hard surfaces such as brick, block and steel where foam has bonded firmly. We control the media, contain the dust and dispose of spent blasting media through licensed waste routes.
sand blasting spray foam insulation removalthermal spray foam removal
Thermal spray foam removal uses heat-assisted techniques on stubborn foam that resists mechanical cutting. It is slower than dry ice blasting but useful on thick closed cell sections and on roof decks where access is restricted.
thermal spray foam removalWarehouse spray Foam removal
Warehouse spray foam removal in Telford covers large roof areas on industrial units in Donnington, Hortonwood and Halesfield. We work in phases to keep your operation running, and provide full RAMS, CHAS accreditation details and waste documentation.
Warehouse spray Foam removalBook environmentally friendly insulation removal in Telford, Shropshire
Call AeroSpace Spray Foam Team on 0195 230 1076 for a fixed-price survey. We have worked across Shropshire since 2022, we hold CHAS accreditation and SafeContractor registration, and every job comes with waste transfer notes and before-and-after photographs.